Rice Lake PR5230 Fieldbus Transmitter - Manual (Page 148)

Commissioning PR 5230 Instrument Manual
EN-148 Sartorius
5.6.6 Network parameter
You can configure settings for the network connections (built-in LAN adapter).
Define the network parameters under -[ Network parameter ].
Press to select the specific parameter.
Press to select the respective values.
The light gray displayed parameter cannot be changed.
Setup/ Network parameter
HW address 00:90:6C:6A:6B:5E Fixed address determined by the instrument
Hostname PR5230-6A6B5E Device name; user-definable*
Use DHCP
Address is assigned by the server
IP Address 172.24.20.57 Address assigned by the server
Subnetmask 255.255.240.0 Mask for permissible IP address range
Default gateway 172.24.16.1 IP number for gateway
Remote access
VNC-Client 255.255.255.255 Permissible client for operation of the instrument
[Hostname]
Caution!
The host name must be unique in the network!
* The device name [Hostname] is subject to the following restrictions:
- Minimum number of characters: 2, maximum number of characters: 24
- The first character must be a letter. Spaces are not permitted.
- 0-9, A-Z (upper and lower case letters are not distinguished) are permitted.
- - or . may be included, but neither at the end nor in succession.
[Use DHCP]
If the checkbox has been marked, the server defines the IP address automatically.
[VNC-Client]
You can configure access permissions for the address:
VNC-Client 0.0.0.0. Access over VNC not permitted
VNC-Client 172.24.21.101 Access only from client machine with this address
VNC-Client 172.24.21.255 Access from any client with address within range 172.24.21.1 - ..254
VNC-Client 255.255.255.255 Access from client with any address
Note:
When setting [IP address], [Subnet mask] and [Standard gateway], please consult with your network
administrator.