Rice Lake 520 Digital Weight Indicator Operator Card - Manual

May 22, 2013
520 Digital Weight Indicator
Operator Card
WARNING
Do not open the indicator enclosure!
Refer all repairs and modifications to
your distributor or service technician.
Front Panel Display and Keypad
The 520 display is divided into three areas (see
Figure 1):
• The primary display consists of seven large,
14-segment digits used to display weight data.
• A two-digit annunciator shows the units
associated with the displayed value: lb=pounds,
kg=kilograms, oz=ounces, T=short tons,
t=metric tons, LT=long tons, g=grams,
GN=grains. The units can also be set to NONE
(no units information displayed).
The 16-digit secondary display is used to display the
weighing mode (Gross/Brutto or Net), status
indicators, including standstill (
) and center of
zero ( ), and Bar Graph and Checkweigh.
The symbols shown over the keys in Figure 2
(representing up, down, enter, left, right) describe the
key functions assigned in setup mode. In setup mode,
the keys are used to navigate through menus, select
d i g i t s w i t h i n n u m e r i c v a l u e s , a n d
increment/decrement values.
1 3 * . " 3 : % * 4 1 - ":
4 & $ 0 / % " 3 : % * 4 1 - ":
%*(*5
"//6/$*"503
GPS6/*54
Figure 1. 520 Front Panel Display Areas
Note
In the count mode, the displayed value is PC
(Piece Count).
Figure 2. 520 Front Panel