Rice Lake PR5230 Fieldbus Transmitter - Manual (Page 87)

PR 5230 Instrument Manual Installing the Instrument and Plug-in Cards
Sartorius EN-87
4.4.8.2 LEDs on the fielbus card
Watchdog LED Meaning
Frequency Color
Flashing 1 Hz green Module is initialized and ready for operation.
Flashing 2 Hz green Module is not initialized.
Flashing 1 Hz red Check error in ASIC and FLASH ROM, module is defect.
LEDs
1 2
3 4
LED 1 LED 2 LED 3 LED 4
Lit - - -:
No link or power off.
Lit - - -:
Offline, no connection.
Lit - - -:
No function.
Lit - - -:
No power or not initialized.
Lit grn:
Link established.
Lit grn:
Link established and
online connected.
Lit grn:
Initialized, no error.
Flashing 1 Hz grn:
Receiving/Transmitting data.
Flashing 1 Hz grn:
Online, no connection.
Flashing 1 Hz grn:
Diagnostic data available.
Flashing 2 Hz grn:
Engineering tool to identify
is active.
Flashing 1 Hz red:
Configuration error.
Flashing 3 Hz red:
No station name,
no IP address
Flashing 4 Hz red:
Internal error.
Legend
--- off
red red
grn green
4.4.8.3 Connection
• Take the cable (e.g. patch cable CAT5) into the instrument through
the metal sleeve of the cable gland, strip the insulation and mount
the delivered RJ-45 plug (see mounting informations).
• Put the RJ-45 plug into the RJ-45 connecting socket of the fieldbus
card.
• Tighten the cable gland of the instrument.