Rice Lake PR5230 Fieldbus Transmitter - Manual (Page 142)

Commissioning PR 5230 Instrument Manual
EN-142 Sartorius
JBUS/MOD-Bus protocol [JBUS/MOD-Bus]
To configure the serial interfaces, press -[Serial ports parameter]-[ JBUS/MOD-Bus] to select a RS-232
interface.
Press
to select the specific parameter.
Press to select the respective values.
The light gray displayed parameter cannot be changed.
Setup/Serial ports/ Builtin RS232
Assigned to JBUS/MOD-Bus
Protocol JBUS/MOD-Bus
Baudrate 9600 bd 300, 600, .... 19200, 38400
Bits 8
Parity even no, odd, even
Stopbits 1
Slave 1
Press to return to the menu ‚Serial ports’.
Press to return to the setup menu of [Serial ports parameter]. When you close this menu, the following
messages are displayed if at least one setting was changed:
Save settings
Starting JBUS/MOD-Bus
The JBUS/MOD bus protocol is described in Chapter 5.10.
SMA protocol [SMA]
To configure the serial interfaces, press -[Serial ports parameter]-[SMA] to select a RS-485 interface.
Press to select the specific parameter.
Press to select the s respective values.
The light gray displayed parameter cannot be changed.
Setup/Serial ports/ Builtin RS485
Assigned to SMA
Protocol SMA
Baudrate 9600 bd 300, 600, .... 19200
Bits 8
Parity none
Stopbits 1
The SMA protocol is described in Chapter 7.