Rice Lake PR5230 Fieldbus Transmitter - Manual (Page 88)

Installing the Instrument and Plug-in Cards PR 5230 Instrument Manual
EN-88 Sartorius
4.4.9 PR 1721/47 EtherNet-IP Interface
The EtherNet/IP interface PR 1721/47 is a plug-in card for mounting in slot 2, see Chapter 4.4.1. The card is
fitted with a standard RJ
- 45 socket for Ethernet connection and contains a powerful TCP/IP and EtherNet/IP
connecting circuitry with transfer rates of 10 and 100 Mbits/s.
Internal connection 34- pin connector on flat cable for
slot 2
External connection RJ-45 connecting socket
Transfer rate 10 Mbit/sec and 100 Mbit/sec
Autodetection (10/100, HalfDX/FullDX)
Connection mode Network
Protocol EtherNet-IP
Configuration EDS file ‚sag_5230_ethernetip.eds’
Cable Twisted pairs, screened
e.g. patch cable CAT5
Autolink (straight or crossover)
Cable impedance 150 ¥
Cable length to HUB Max. 115 m
Potential isolation Yes Certificate EtherNet-IP Specification
ODVA File No. 10286
Test Date: 06.09.2005
Vendor ID 90
See also: www.odva.org
Tested according to: CE, UL & cUL
Dimens. (LxWxH) 87 x 55 x 15mm
Weight
125 g
Note:
The IP-Address and the Subnet-Mask are set at Fieldbus parameter (see also Chapter 5.6.5 and 9).
The EDS file is stored on the CD (directory ‘Fieldbus’ of the according instrument) supplied with
the unit. The current file is also available for download via the Internet:
http://www.sartorius-mechatronics.com [Downloads].