Rice Lake PR5230 Fieldbus Transmitter - Manual (Page 157)

PR 5230 Instrument Manual Commissioning
Sartorius EN-157
2. Determining a condition
The selected action of each digital input can be combined with a condition that must be met for signal change
from 0 to 1 (on) or for signal change from 1 to 0 (off). Select the condition from the list; see page 152. No
condition is defined when selecting [no condition]; the action is executed directly.
Example: Taring via the digital input only if the gross weight exceeds the limit value.
Press and select [Digital I/O parameter] to open the configuration menu.
Setup/ Digital I/O parameter
Output 1 marker bit 1 X64=1
Output 2 marker bit 2 X65=1
Output 3 marker bit 3 X66=1
Input 1 on set tare X113=1
Condition tare active X58=0
Input 1 off -no action-
Input 2 on -no action-
Input 2 off -no action-
Input 3 on -no action-
Input 3 off -no action-
BCD out Gross
In this example: If input 1 changes from 0 to 1 [input 1 on], a taring signal is triggered only if the condition under
[Condition] is met (limit 1 out = active).
5.9 Display of Limits and Digital Inputs/Outputs
5.9.1 VNC Display
Info/ HW-Slots
Builtin Digital i/o
In use by PLC task 2
Digital outputs 001 The status is indicated from right to left.
Digital inputs 000
5.9.2 Instrument Display
The status is indicated from left to right.