Rice Lake PR5230 Fieldbus Transmitter - Manual (Page 158)

Commissioning PR 5230 Instrument Manual
EN-158 Sartorius
5.10 Analog Output
The analog output card PR 5230/06 can be mounted in slot 1.
Define the analog output parameters under -[Analog output parameter ].
Press to select the specific parameter.
Press to select the respective values.
Setup/ Analog output parameter
Analog mode Gross D08
Analog range 0…20 mA
Output on error 0 mA
Output if < 0 linear
Output if > Max linear
Weight at 0/4 mA 0 g
Weight at 20 mA 240000 g
[Analog mode] [no output] The analog output is not used
[Gross D08] Output of the gross weight
[Net if tared D09] Output of the net weight, if tared; otherwise gross weight
[Selected D11] Output Gross or Net, depending on SPM-Bit X72
[Transparent D30] Output of the value in D30
[Analog range] [0...20 mA] Output of 0... 20 mA
[4...20 mA] Output of 4... 20 mA
[Output on error] [0 mA] Set the output to 0 mA
[4 mA] Set the output to 4 mA
[20 mA] Set the output to 20 mA
[Output if < 0] [0 mA] Set the output to 0 mA
[4 mA] Set the output to 4 mA
[20 mA] Set the output to 20 mA
[linear] The output drops below 4 mA up to the limitation
(at 4 .. 20 mA)
[Output if > Max] [0 mA] Set the output to 0 mA
[4 mA] Set the output to 4 mA
[20 mA] Set the output to 20 mA
[linear] The output exceeds 20 mA up to the limitation
[Weight at 0/4 mA] Weight value for 0/4 mA output
[Weight at 20 mA] Weight value for 20 mA output
Press to return to the previous menu.