Rice Lake PR5230 Fieldbus Transmitter - Manual (Page 144)

Commissioning PR 5230 Instrument Manual
EN-144 Sartorius
5.6.2 Date and Time
Select -[Date & Time] to set date and time.
Setup/ Clock
Date 2009-08-18 Date and
Time 11:24:53 time can be overwritten
5.6.3 Operating parameters
Define the basic operating parameters under -[ Operating parameter ].
Press to select the specific parameter.
Press to select the respective values.
Setup/ Operating parameter
Address A Select A - Z
PIN ****** Enter the access code
Sequencenumber 28 Counter for print jobs
SetTareKey tare & reset tare tare & reset tare, tare & tare again, disabled
SetZeroKey only when not tared Only when not tared, reset tare on zeroset,
disabled
[Address]
Device address; e.g. for print-out.
[PIN]
The access code can be used to protect the [Setup] from unauthorized operation. Enter a number with up to
6 digits. As long as you are in this menu, the value can be overwritten as required.
SUPER-PIN
If the PIN-Code is lost, the Setup can be unlocked with Super-PIN '212223'.
[Sequencenumber]
The number (counter for print jobs) may appear (selectable) on the print-out too, is incremented automatically
(max. 999999) and can be set here.
[SetTareKey]
The function of the tare key on the keypad can be configured:
[tare
& reset tare]: the scale is tared if it was not tared previously; otherwise, tare is reset.
[tare & tare again]: when you press the [Tare] key, the current value is stored in the tare memory and a net
weight of 0 is displayed. [disabled]: The key has no function.