Rice Lake 320IS Intrinsically-Safe Digital Weight Indicator - IS-6V Battery Pack Instruction Sheet - Manual

IS-6V Battery Pack Instruction Sheet
The IS–6V Battery Pack is an FM-Entity Approved battery supply for Class 1 Division I Groups A, B, C, D and
Class II Division I Groups E, F, G and Class III (T-rating T6). It is mounted below the indicator and is removable
for charging in the safe area. Install per RLWS Control Drawing 77412.
Authorized distributors and their employees can view or download this instruction sheet from the Rice
Lake Weighing Systems distributor site at
www.ricelake.com .
Battery Installation in Tilt Stand
1. Slide battery in tilt stand with connector cable on side that rear of indicator is mounted.
2. Insert screws in both sides to mount.
3. Connect the cable assembly (male) from the indicator to the cable assembly (female) from the battery
pack. Ensure that the keys on each cable assembly are lined up properly with each other.
Figure 1. Battery Installation in Tilt Stand
(4.87)
(3.69)
(2.64)
79899 September 2010
To be the best by every measure