Dell PowerVault MD3260i - Manual (Page 331)

Parameter Description
identifier in square brackets ([ ]). If the SSD cache name
contains special characters or consists only of numbers,
you also must enclose the identifier in double quotation
marks (" ") inside square brackets.
Notes
This command returns the SSD cache information similar to this example.
SSD Cache name: my_cache
Status: Optimal
Type: Read Only
I/O characteristic type: File System
Maximum capacity allowed: 1,862.645 GB
Current capacity: 557.792 GB
Additional capacity allowed 1,304.852 GB
Physical disk capacities: All 278.896 GB
Data Service (DS) Attributes
Security capable: No
Secure: No
Data Assurance (DA) capable: No
Associated physical disks:
Enclosure Slot
0 4
0 11
Virtual disks using SSD cache: virtualDisk_test
Show SSD Cache Statistics
Description
This command displays data about the SSD cache usage.
Syntax
show ssdCache [ssdCacheName] ssdCacheStatistics [RAID controller module=[(0|1|
both)] file="filename"]
331