Dell PowerVault MD3260i - Manual (Page 246)

Parameter Description
• NEWEST - Use this option when you want to show
the latest snapshot image created in the snapshot
group.
• OLDEST - Use this option when you want to show
the earliest snapshot image created in the
snapshot group.
Enclose the snapshot image name in double quotation
marks (" ") inside square brackets ([ ]).
Notes
The name of a snapshot image has two parts separated by a colon (:):
• The identifier of the snapshot group
• The identifier of the snapshot image
For example, if you want to resume snapshot virtual disk operations for snapshot image 12345 in a snapshot group that
has the name snapGroup1, use the following command:
resume snapVirtualDisk [snapVol1] snapImage=["snapGroup1:12345"];
To resume snapshot virtual disk operations for the most recent snapshot image in a snapshot group that has the name
snapGroup1, use the following command:
resume snapVirtualDisk [snapVol1] snapImage=["snapGroup1:newest"];
Resume SSD Cache
Description
This command restarts the caching for all virtual disks using the SSD cache that was temporarily stopped with the
suspend ssdCache command.
Syntax
resume ssdCache [ssdCacheName]
Parameter
Parameter Description
ssdCache The alphanumeric identifier (including - and _) of the SSD
cache that you want to resume. Enclose the identifier in
square brackets ([ ]). If the SSD cache name contains
special characters or consists only of numbers, you also
must enclose the identifier in double quotation marks (" ")
inside square brackets.
246