Dell PowerVault MD3260i - Manual (Page 294)

Set Snapshot Virtual Disk Media Scan
Description
This command runs a media scan on the physical disks used for a snapshot virtual disk. You also can perform a
consistency check on the data.
Syntax
set snapVirtualDisk ["snapVirtualDiskName"]
mediaScanEnabled=(TRUE | FALSE)
[consistencyCheckEnabled=(TRUE | FALSE)]
Parameters
Parameter Description
snapVirtualDisk The alphanumeric identifier (including - and _) of the
snapshot virtual disk for which you are setting properties.
Enclose the snapshot virtual disk identifier in double
quotation marks (" ") inside of square brackets ([ ]).
mediaScanEnabled The setting to turn on or turn off media scan for the
snapshot virtual disk. To turn on media scan, set this
parameter to TRUE. To turn off media scan, set this
parameter to FALSE. (If media scan is disabled at the
storage array level, this parameter has no effect.)
consistencyCheckEnabled The setting to turn on or turn off consistency checking
during a media scan. To turn on consistency checking, set
this parameter to TRUE. To turn off consistency checking,
set this parameter to FALSE.
Set Snapshot Virtual Disk Repository Virtual Disk Capacity
Description
This command defines the capacity the you can set for a snapshot virtual disk repository virtual disk.
Syntax
set snapVirtualDisk ["snapVirtualDiskName"]
(repositoryFullLimit=percentValue |
increaseRepositoryCapacity (repositoryVirtualDisk=(repos_xxxx) |
decreaseRepositoryCapacity count=numberOfVirtualDisks)
294