Dell PowerVault MD3260i - Manual (Page 152)

Parameters
Parameter Description
userLabel The name of the new consistency group that you want to
create. Enclose the new consistency group name in
double quotation marks (" ").
repositoryFullPolicy How you want snapshot processing to continue if the
snapshot repository virtual disks are full. You can choose
to fail writes to the base virtual disk (failBaseWrites)
or delete (purge) the snapshot images
(purgeSnapImages). The default action is
purgeSnapImages.
repositoryFullLimit The percentage of repository capacity at which you
receive a warning that the snapshot repository virtual disk
is nearing full. Use integer values. For example, a value of
70 means 70 percent. The default value is 75.
autoDeleteLimit The maximum number of snapshot images that you want
to automatically delete if you have selected to purge the
snapshot images for a repository full policy. The default
value is 32.
enableSchedule Whether the ability to schedule a snapshot operation is
turned on or turned off. To turn on snapshot scheduling,
set this parameter to TRUE. To turn off snapshot
scheduling, set this parameter to FALSE.
schedule Use this parameter to schedule a snapshot operation.
You can use one of these options for setting a schedule
for a snapshot operation:
• immediate
• startDate
• scheduleDay
• startTime
• scheduleInterval
• endDate
• timesPerDay
• timeZone
See the Notes section for information explaining how to
use these options.
rollBackPriority Determines whether system resources should be
allocated to the rollback operation at the expense of
system performance. A value of high indicates that the
rollback operation is prioritized over all other host I/O. A
value of low indicates that the rollback operation should
be performed with minimal impact to host I/O.
152