Dell PowerVault MD3260i - Manual (Page 261)

Support-related information includes:
• The storage array profile
• The Major Event Log information
• The NVSRAM data
• Current problems and associated recovery information
• The performance statistics for the entire storage array
• The persistent registration information and the persistent reservation information
• Detailed information about the current status of the storage array
• The diagnostic data for the physical disk
• A recovery profile for the storage array
• The unreadable sectors that are detected on the storage array
• The state capture data
• An inventory of the versions of the firmware running on the RAID controller modules, the physical disks, and the
RAID controller modules
Syntax
save storageArray supportData file="filename"
[force=(TRUE | FALSE)]
Parameters
Parameter Description
file The path and the file name where support-related data for
the storage array is saved. Enclose the file path and the
file name in double quotation marks (" "). For example,
file="C:\Program Files\CLI\logs
\supdat.zip". This command does not
automatically append a file extension to the saved file. A
file extension must be specified when entering the file
name.
force Forces collection of support data when there is a failure in
securing a lock on controller operations. To force the
collection of support data, set this parameter to TRUE.
The default value is FALSE.
Schedule Support Bundle Collection Configuration
Description
This command specifies a schedule for collecting support bundle data.
NOTE: This command must be run from the command line. It cannot be run in the MD Storage Manager script
editor.
Syntax
SMcli -supportBundle schedule (enable|disable) (all|storageArrayName)
[data=pathName]
261