beautypg.com

Dell PowerVault MD3260i User Manual

Page 278

background image

Parameter

Description

firmware for the RAID controller module returns a syntax
error.

availability

The mode for the RAID controller module, which you can set
to online, offline, or serviceMode (service).

ethernetPort

The attributes (options) for the management Ethernet ports.
The entries to support this parameter are listed in the Syntax
Element Statement Data table that follows. Many settings
are possible, including setting the IP address, the gateway
address, and the subnet mask address.

globalNVSRAMByte

A portion of the RAID controller module NVSRAM. Specify
the region to be modified using the starting byte offset within
the region and the size and value of the new data to be
stored into the NVSRAM.

hostNVSRAMByte

The NVSRAM for the host-specific region. The setting
specifies the host index for the specific host, the starting
offset within the region, the number of bytes, and the values
to be written.

IPv4GatewayIP

The IP address of the node that provides the interface to the
network. The address format for the IPv4 gateway is (0–255).
(0–255).(0–255).(0–255).

IPv6RouterAddress

The IP address of IPv6 router that connects two or more
logical subnets. The address format for the IPv6 router is (0–
FFFF):(0–FFFF):(0–FFFF):(0– FFFF): (0–FFFF):(0–FFFF):(0–FFFF):
(0– FFFF).

iscsiHostPort

The values that support this parameter are listed in the
Syntax Element Statement Data table that follows. Many
settings are possible, including setting the IP address, the
gateway address, the subnet mask address, the IPv4 priority,
and the IPv6 priority.

rloginEnabled

The setting for whether the remote login feature is turned on
or turned off. To turn on the remote login feature, set this
parameter to TRUE. To turn off the remote login feature, set
this parameter to FALSE.

serviceAllowedIndicator

The setting for whether the Service Action Allowed indicator
light is turned on or turned off. To turn on the Service Action
Allowed indicator light, set this parameter to on. To turn off
the Service Action Allowed indicator light, set this parameter
to off.

278