Dell PowerVault MD3260i - Manual (Page 289)

Parameter Description
this parameter to TRUE. To turn off consistency checking,
set this parameter to FALSE.
Set Snapshot Group Repository Virtual Disk Capacity
Description
This command increases or decreases the capacity of a snapshot group repository virtual disk.
Syntax For Increasing Capacity
set snapGroup ["snapGroupName"]
increaseRepositoryCapacity repositoryVirtualDisks=(repos_xxxx)
Syntax For Decreasing Capacity
set snapGroup ["snapGroupName"]
decreaseRepositoryCapacity count=numberOfVirtual disks
Parameters
Parameter Description
snapGroup The alphanumeric identifier (including - and _) of the
snapshot group on which you want to run a media scan.
Enclose the snapshot group name in double quotation
marks (" ") inside of square brackets ([ ]).
repositoryVirtualDisk The name of the repository virtual disk for which you want
to increase capacity. An available standard virtual disk is
added to the repository virtual disk to increase the
capacity of the repository virtual disk.
The repository virtual disk name is comprised of two parts:
• The term repos
• A numerical identifier generated by the MD
storage management software and the firmware
count The number of repository virtual disks that you want to
remove from the snapshot group. Use integer values.
Set Snapshot Group Schedule
Description
This command defines the schedule for taking snapshot images for a snapshot group.
289