Dell PowerVault MD3260i - Manual (Page 349)

Parameters
Parameter Description
diskGroup Number of the disk group to identify. You must put
brackets ([ ]) around the disk group number.
Start Disk Group Defragment
Description
This command starts a defragment operation on the specified disk group.
NOTE: Defragmenting a disk group starts a long ‑running operation that you cannot stop.
Syntax
start diskGroup [diskGroupNumber] defragment
Parameters
Parameter Description
diskGroup Number of the disk group to defragment. You must put
brackets ([ ]) around the disk group number.
Start Disk Group Export
Description
This command moves a disk group into an Exported state. Then you can remove the physical disks that comprise the
disk group and reinstall the physical disks in a different storage array.
NOTE: Within the disk group, you cannot move virtual disks that are associated with the premium features from one
storage array to another storage array.
Syntax
start diskGroup [diskGroupName] export
Parameters
Parameter Description
diskGroup Number of the disk group to defragment. You must put
brackets ([ ]) around the disk group number.
349