Dell PowerVault MD3260i - Manual (Page 32)

Recurring Syntax Syntax Value
IPV4GatewayIP=
ipv4-address |
IPV6HopLimit= integer |
IPV6NdDetectDuplicateAddress= integer |
IPV6NdReachableTime= integer |
IPV6NdRetransmitTime= integer |
IPV6NdTimeOut= integer |
IPV4Priority= integer |
IPV6Priority= integer |
IPV4SubnetMask= ipv4-address |
IPV4VlanID= integer |
IPV6VlanID= integer |
maxFramePayload= integer |
tcpListeningPort= tcp-port-id |
NOTE: You must set the enableIPV4 parameter or the
enableIPV6 parameter to TRUE to ensure that the
specific IPV4 or IPV6 setting is applied.
NOTE: The IPV6 address space is 128 bits. It is
represented by eight 16-bit hexadecimal blocks
separated by colons. You may drop leading zeros, and
use a double colon to represent consecutive blocks
of zeroes.
instance-based-repository-spec repositoryRAIDLevel= repository-raidlevel
repositoryPhysicalDisks=( physical diskspec- list )
[enclosureLossProtect=boolean]
repositoryDiskGroup=virtual-diskgroup- number
[freeCapacityArea=integer-literal]
Specify repositoryRAIDLevel with
repositoryPhysicalDisks. Do not specify RAID
level or physical disks with a disk group. Do not set
enclosureLossProtect when specifying a disk
group.
NOTE: For enclosure loss protection to work, each
physical disk in a disk group must be on a separate
enclosure. If you set
enclosureLossProtect=TRUE and have
selected more than one physical disk from any one
enclosure, the storage array returns an error. If you
set enclosureLossProtect=FALSE, the
storage array performs operations, but the disk group
you create might not have enclosure loss protection.
NOTE: To determine if a free capacity area exists,
issue the show diskGroup command.
count-based-repository-spec repositoryRAIDLevel= repository-raidlevel
repositoryPhysicalDiskCount= integerliteral
32