Dell PowerVault MD3260i - Manual (Page 250)

Save Physical Disk Channel Fault Isolation Diagnostic Status
Description
This command saves the physical disk channel fault isolation diagnostic data that is returned from the start
physical disk channel fault isolation diagnostics command. You can save the diagnostic data
to a file as standard text or as XML.
See Start Physical Disk Channel Fault Isolation Diagnostics for more information.
Syntax
save physicalDiskChannel [(1 | 2 )]
faultDiagnostics file=”filename”
Parameters
Parameter Description
physicalDiskChannel The identifier number of the physical disk channel for
which you want to save the diagnostics data. Valid values
for the identifier number are 1 or 2. Enclose the identifier
number in square brackets ([ ]).
file The name of the file in which you are storing the results of
the fault isolation diagnostics test on the drive channel.
Enclose the name in double quotation marks (" ").
NOTE: A file extension is not automatically appended to the saved file. You must specify the applicable format
suffix for the file. If you specify a file extension of .txt, then the output is in a text file format. If you specify a file
extension of .xml, then the output is in an XML file format.
Save Physical Disk Log
Description
This command saves the log sense data to a file. Log sense data is maintained by the storage array for each physical
disk.
Syntax
save allPhysicalDisks logFile="filename"
250