Dell PowerVault MD3260i - Manual (Page 188)

Syntax
create snapVirtualDisk userLabel="snapVirtualDiskName" snapImageID="snapImageID"
[repositoryVirtualDisk="repos_xxxx" |
repositoryFullLimit=percentValue]
Parameters
Parameter Description
userLabel The alphanumeric identifier (including - and _) that you
want to give to a snapshot virtual disk. Enclose the
snapshot virtual disk name in double quotation marks (" ").
snapImageID The alphanumeric identifier of a snapshot image that you
want to add to the new snapshot virtual disk. The identifier
of a snapshot image is comprised of two parts:
• The name of the snapshot group.
• An identifier for the snapshot image in the
snapshot group.
The identifier for the snapshot image can be one of these:
• An integer value that is the sequence number of
the snapshot in the snapshot group.
• NEWEST - Use this option when you want to show
the latest snapshot image created in the snapshot
group.
• OLDEST - Use this option when you want to show
the earliest snapshot image created in the
snapshot group.
Enclose the snapshot image name in double quotation
marks (" ").
repositoryVirtualDisk The alphanumeric identifier of the repository virtual disk
has the snapshot image. All repository identifiers have this
form: repos_xxxx
where xxxx represents a four digit numerical value.
Enclose the snapshot virtual disk name in double
quotation marks (" ").
repositoryFullLimit The percentage of repository capacity at which you
receive a warning that the snapshot repository virtual disk
is nearing full. Use integer values. For example, a value of
70 means 70 percent. The default value is 75.
Notes
You can use any combination of alphanumeric characters, underscore (_), hyphen (-), and pound (#) for the names.
Names can have a maximum of 30 characters.
The identifier of a snapshot image has two parts separated by a colon (:):
• The name of the snapshot group.
188