Dell PowerVault MD3260i - Manual (Page 299)

Set Storage Array ICMP Response
Description
This command returns the default values for negotiable settings for sessions and connections, which represent the
starting point for the storage array for negotiations.
Syntax
set storageArray icmpPingResponse=(TRUE | FALSE)
Parameter
Parameter Description
icmpPingResponse This parameter turns on or turns off Echo Request
messages. Set the parameter to TRUE to turn on Echo
Request messages. Set the parameter to FALSE to turn
off Echo Request messages.
Set Storage Array iSNS Server IPv4 Address
Description
This command sets the configuration method and address for an IPv4 Internet Storage Name Service (iSNS).
Syntax
set storageArray isnsIPv4ConfigurationMethod=[static | dhcp]
isnsIPv4Address=ipAddress
Parameter
Parameter Description
isnsIPv4Address The IP address that you want to use for the iSNS server.
Use this parameter with the static value for IPv4
configurations. If you choose to have a DHCP server set
the IP address for an IPv4 Internet iSNS server, you must
set the isnsIPv4Address parameter to 0.0.0.0.
Set Storage Array iSNS Server IPv6 Address
Description
This command sets the IPv6 address for the iSNS server.
299