Dell PowerVault MD3260i - Manual (Page 260)

Save Storage Array SAS PHY Counts
Description
This command saves the storage array SAS physical layer (SAS PHY) counters to a file. To reset the SAS PHY counters,
run the Reset Storage Array SAS PHY Baseline command. See Reset Storage Array SAS PHY Baseline.
Syntax
save storageArray SASPHYCounts file="filename"
Parameters
Parameter Description
file Specifies the file path and the file name to which you save
the SAS PHY counters. Enclose the file path and the file
name in double quotation marks (" "). For example: file="C:
\Program Files\CLI\logs\sasphy.csv"
This command does not automatically append a file
extension to the saved file. Any file name is acceptable,
but the .csv extension must be used.
Save Storage Array State Capture
Description
This command saves the state capture to a file.
Syntax
save storageArray stateCapture file="filename"
Parameters
Parameter Description
file Name of the file to which to save the state capture. You
must put quotation marks (" ") around the file name.
Save Storage Array Support Data
Description
This command saves the storage array support-related information to a file.
260