Dell PowerVault MD3260i - Manual (Page 149)

Clear Virtual Disk Reservations
Description
This command clears persistent virtual disk reservations.
Syntax
clear (allVirtualDisks | virtualDisk [virtualDiskName]
| virtualDisks [virtualDiskName1... virtualDiskNameN])
reservations
Parameters
Parameter Description
allVirtualDisks Clears reservations on all virtual disks in the storage
array.
virtualDisk or virtualDisks Name of the specific virtual disk for which to clear
reservations. You can enter more than one virtual disk
name. You must put brackets ([ ]) around the virtual disk
name. If the virtual disk name has special characters, you
must also put quotation marks (" ") around the virtual disk
name.
NOTE: You can use any combination of alphanumeric characters, hyphens, and underscores for the names.
Command names can have a maximum of 30 characters. If you exceed the maximum character limit, replace
square brackets ([ ]) with angle brackets (< >) to overcome this limitation.
Clear Virtual Disk Unreadable Sectors
Description
This command clears the unreadable sector information from one or more virtual disks.
Syntax
clear (allVirtualDisks | virtualDisk
[virtualDiskName] | virtualDisks [virtualDiskName1
... virtualDiskNameN]) unreadableSectors
149