Dell PowerVault MD3260i - Manual (Page 197)

Delete Disk Pool
Description
This command deletes a disk pool.
Syntax
delete diskPool [diskPoolName]
Parameter
Parameter Description
diskPoolName The alphanumeric identifier of the disk pool (including –
and _) that you want to delete. Enclose the disk pool name
in square brackets ([ ]). If the disk pool name has special
characters, you also must enclose the host group name in
double quotation marks (" ").
Notes
If the disk pool contains virtual disks, the virtual disks are deleted along with the disk pool.
Delete Host
Description
This command deletes a host.
Syntax
delete host [hostName]
Parameter
Parameter Description
host Name of the host to delete. You must put brackets ([ ])
around the host name. If the host name has special
characters, you must also put quotation marks (" ") around
the host name.
NOTE: A host is a system that is attached to the
storage array and accesses the virtual disks on the
storage array through its HBA host ports.
197