Save storage array events, Description, Syntax – Dell PowerVault MD3260i User Manual
Page 257
Parameter
Description
example: dbmDatabase="C:\Array Backups
\DBMbackup_03302010.dbm". This command does not
automatically append a file extension to the saved file. You
must specify the .dbm file extension when you enter the
file name.
Notes
If you are generating the XML information file in order to obtain a validator string, you must run this command while you
are connected to the controller where you intend to restore the database. The following example show the format of the
XML file:
1IT0nnnnnnnnnABCDA>1IT0nnnnnnnnnABCD
1T0nnnnnnnnnABCDB
Save Storage Array Events
Description
This command saves events from the Major Event Log (MEL) to a file.
Any or all of the following events can be saved:
•
Critical events—Errors occurring on the storage array that needs to be addressed immediately. Loss of data
access may occur if the error is not immediately corrected.
•
Warning events—Errors occurring on the storage array resulting in degraded performance or reduced ability to
recover from additional errors. Access to data has not been lost, but the must be corrected to prevent possible
loss of data access in the event of an additional error.
•
Informational events—Events occurring on the storage array that do not impact normal operations. This event is
reporting a change in configuration or other information useful in evaluating the performance of the storage
array.
•
Debug events—Events occurring on the storage array that provides information useful in determining steps or
states that led to the error. This information may be useful to your Technical Support representative in helping
determine error causes.
NOTE: Some storage arrays may be unable to support all the above mentioned types of events.
Syntax
save storageArray (allEvents | criticalEvents warningEvents
| infoEvents | debugEvents)
257