Dell PowerVault MD3260i - Manual (Page 167)

Parameter Description
drawerLossProtect The setting to enforce drawer loss protection when you create the
replication repository disk group. To enforce drawer loss protection, set
this parameter to TRUE. The default value is FALSE.
dssPreAllocate The setting to make sure that reserve capacity is allocated for future
segment size increases. The default value is TRUE.
securityType The setting to specify the security level when creating the disk groups
and all associated virtual disks.
• none—The disk group and virtual disks are not secure.
• capable—The disk group and virtual disks are capable of
having security set, but security has not been enabled.
• enabled—The disk group and virtual disks have security
enabled.
For information about securityType, see Security Type.
Create RAID Virtual Disk (Free Capacity Base Select)
Description
This command creates a virtual disk in the free space of a disk group.
Syntax
create virtualDisk diskGroup=[diskGroupName]
userLabel=”virtualDiskName”
[freeCapacityArea=freeCapacityIndexNumber
capacity=virtualDiskCapacity
owner=(0 | 1)cacheReadPrefetch=(TRUE | FALSE)
segmentSize=segmentSizeValue
usageHint=(fileSystem | dataBase | multiMedia)]
[dssPreAllocate=(TRUE | FALSE)
securityType=(none | capable | enabled)]
Parameters
Parameter Description
diskGroup Sequence number of the disk group in which to create the
new virtual disk. (To determine the sequence numbers of
the disk groups in your storage array, enter the show
storageArray Profile command.)
userLabel Name for the new virtual disk. You must put quotation
marks (" ") around the new virtual disk name.
167