Dell PowerVault MD3260i - Manual (Page 317)

Show Disk Group
Description
This command returns the following information about a disk group:
• Status (online or offline)
• Physical disk type (SAS)
• Enclosure loss protection (yes or no)
• Current owner (RAID controller module 0 or RAID controller module 1)
• Associated virtual disks and free capacity
• Associated physical disks
NOTE: You can use the free capacity area value when you create a virtual disk based on the free capacity of a disk
group. For a description of how to use the free capacity value, see the create virtualDisk command on
Create RAID Virtual Disk (Free Capacity Base Select).
Syntax
show diskGroup [diskGroupNumber]
Parameter
Parameter Description
diskGroup Number of the disk group for which to display information.
You must put brackets ([ ]) around the disk group number.
Show Disk Group Export Dependencies
Description
This command shows a list of dependencies for the physical disks in a disk group that you want to move from one
storage array to a second storage array.
Syntax
show diskGroup [diskGroupName] exportDependencies
Parameter
Parameter Description
diskGroup Number of the disk group for which to display information.
You must put brackets ([ ]) around the disk group number.
317