Dell PowerVault MD3260i - Manual (Page 233)

Parameters
Parameter Description
allVirtualDisks Removes the LUN mapping from all virtual disks.
virtualDisk or virtualDisks Name of the specific virtual disk to remove from the LUN
mapping. You can enter more than one virtual disk name.
You must put quotation marks (" ") and brackets ([ ]) around
the virtual disk name. The virtual disk name and quotation
marks must be inside the brackets.
accessVirtualDisk Removes the access virtual disk.
CAUTION: The host agent uses the access virtual
disks to communicate in-band with a storage array. If
you remove an access virtual disk mapping for a
storage array from a host that has an agent running
on it, the storage management software is no longer
able to manage the storage array through the in-band
agent.
host Name of the host to which the virtual disk is mapped. You
must put quotation marks (" ") around the host name.
hostGroup Name of the host group that contains the host to which
the virtual disk is mapped. You must put quotation marks ("
") around the host group name.
NOTE: You must use the host and hostGroup parameters when specifying a nonaccess virtual disk or an
access virtual disk. The script engine ignores the host or hostGroup parameters when you use the
allVirtualDisks or virtualDisks parameters.
Rename A Snapshot Virtual Disk
Description
This command renames an existing snapshot virtual disk.
Syntax
set snapVirtualDisk ["snapVirtualDiskName"]
userLabel="snapImageVirtualDiskName"
233