Dell PowerVault MD3260i - Manual (Page 244)

If the rollback operation cannot be resumed, the selected snapshot virtual disk reverts to a paused state, and the Needs
Attention condition is displayed.
NOTE: You cannot use this command for snapshot images involved in online virtual disk copy.
Syntax
resume snapImage [snapImageName] rollback
Parameter
Parameter Description
snapImage The name of the snapshot image for which you want to
restart a rollback operation. The name of a snapshot
image is comprised of two parts:
• The name of the snapshot group.
• An identifier for the snapshot image in the
snapshot group.
The identifier for the snapshot image can be one of these:
• An integer value that is the sequence number of
the snapshot in the snapshot group.
• NEWEST - Use this option when you want to show
the latest snapshot image created in the snapshot
group.
• OLDEST - Use this option when you want to show
the earliest snapshot image created in the
snapshot group.
Enclose the snapshot image name in double quotation
marks (" ") inside square brackets ([ ]).
Notes
The name of a snapshot image has two parts separated by a colon (:):
• The identifier of the snapshot group
• The identifier of the snapshot image
For example, if you want to restart a rollback operation for snapshot image 12345 in a snapshot group that has the name
snapgroup1, you would use this command:
resume snapImage ["snapgroup1:12345"] rollback;
Resume Snapshot (Legacy) Rollback
Description
This command resumes a rollback operation that has entered a paused state. A rollback operation can enter a paused
state due to processing errors which triggers a Needs Attention condition for the storage array. If the rollback operation
244