Dell PowerVault MD3260i - Manual (Page 142)

virtualDiskCopy target[targetName] repositoryConsistency |
localVirtualDisk="localVirtualDiskName"]
file="filePath"
Parameters
Parameter Description
repositoryConsistency Specifies that the snapshot group, snapshot virtual disk, or
virtual disk (depending on which is specified by the
corresponding parameter) is checked for consistency.
snapGroup The alphanumeric identifier (including - and _) of the
snapshot group on which to run a consistency check.
Enclose the snapshot group identifier in square brackets
([ ]).
snapVirtualDisk The alphanumeric identifier (including - and _) of the
snapshot virtual disk on which to run a consistency check.
Enclose the snapshot virtual disk identifier in square
brackets ([ ]).
virtualDisk The alphanumeric identifier (including - and _) of the thin
virtual disk on which to run a consistency check. Enclose
the virtual disk identifier in square brackets ([ ]).
virtualDiskCopy Specifies that the target of a virtual disk copy relationship
is checked for consistency.
target Use only in conjunction with the virtualDiskCopy
parameter to specify the alphanumeric identifier of the
virtual disk that is the target of the virtual disk copy
relationship. Enclose the virtual disk identifier in double
quotation marks (" ").
file The file path and the file name to which you want to save
the report that results from the consistency check.
Enclose the file name in double quotation marks (" "). For
example: file="C:\Program Files\CLI\logs
\repoConsistency.txt". This parameter must appear last,
after any of the optional parameters.
Check Storage Array Connectivity
Description
This command verifies that the local storage array and the remote storage array have a communication path and
displays the connection details between the local and remote storage array.
Before creating a remote replication group, you should check whether the local storage array and the remote storage
array can communicate with each other. When you execute this command, the system queries for the remote storage
array on all eligible host ports to determine what ports are connected to the remote storage array. The result of the test
is a list of all ports on the local storage array along with a list of the remote storage array port addresses accessible
through that port.
142