Dell PowerVault MD3260i - Manual (Page 335)

Parameters
Parameter Description
profile Displays all properties of the logical and physical
components that comprise the storage array.
The information returned takes several screens to display.
NOTE: The profile parameter returns detailed
information about the storage array. The information
covers several screens on a display. You might need
to increase the size of your display buffer to see all
the information. Because this information is so
detailed, you might want to save the output of this
parameter to a file. To save the output to a file, enter
the show storageArray command similar to the
following:
smcli 123.45.67.89 -c "show
storagearray profile;" -o "c:\folder
\storagearray profile.txt"
NOTE: The previous command syntax is for a host
running Windows. The actual syntax varies
depending on your operating system.
autoSupportConfig The parameter to return information about the current
state of the operation to automatically collect support
data. The information this parameter returns is:
• Whether the operation is enabled or disabled
• The location of the folder where the support data
file is located
batteryAge Displays the status, the age of the battery in days, and the
number of days until the battery needs to be replaced.
connections Displays a list of the drive channel port locations and the
drive channel connections.
defaultHostType Displays the default host type and host type index.
healthStatus Displays the health, logical properties, and physical
component properties of the storage array.
hostTypeTable Displays a table of all host types known to the RAID
controller module. Each row in the table displays a host
type index and the platform the index represents.
hotSpareCoverage Displays information about which virtual disks of the
storage array have hot spare coverage and which virtual
disks do not.
features Displays a list of the feature identifiers for all enabled
features in the storage array.
335