Rockwell Automation PLC-5 Fieldbus Solutions for Integrated Architecture User Manual User Manual
Page 78
Publication 1757-UM006A-EN-P - May 2002
2-34 Integrating Fieldbus into Rockwell Automation Logix System
BLOCK
BLOCK_ERR: 5 (Dev Fault State Set)
FFFLSAFE
BLOCK
BLOCK_ERR: 6 (Dev Needs Maintenance Soon)
FFDEVNMS
BLOCK
BLOCK_ERR: 7 (I/P Failure or PV BAD Status)
FFINFL
BLOCK
BLOCK_ERR: 8 (O/P Failure)
FFOUTFL
BLOCK
BLOCK_ERR: 9 (Memory Failure)
FFMEMFL
BLOCK
BLOCK_ERR: 10 (Lost Static Data)
FFLSTDTA
BLOCK
BLOCK_ERR: 11 (Lost NV Data)
FFLNVDTA
BLOCK
BLOCK_ERR: 12 (Readback Check Failed)
FFRBCKFL
BLOCK
BLOCK_ERR: 13 (Dev Needs Maintenance Soon)
FFDEVNMS
BLOCK
BLOCK_ERR: 14 (Power Up)
FFPWRUP
BLOCK
BLOCK_ERR: 15 (Out-Of-Service)
FFOOS
BLOCK
XD_ERROR: 16 (Unspecified Error)
TBUNSPEC
BLOCK
XD_ERROR: 17 (General Error)
TBGENRAL
BLOCK
XD_ERROR: 18 (Calibration Error)
TBCALERR
BLOCK
XD_ERROR: 19 (Configuration Error)
TBCFGERR
BLOCK
XD_ERROR: 20 (Electronics Failure)
TBELECFL
BLOCK
XD_ERROR: 21 (Mechanical Failure)
TBMECHFL
BLOCK
XD_ERROR: 22 (I/O Failure)
TBIOFL
BLOCK
XD_ERROR: 23 (Data Integrity Error)
TBDTAERR
BLOCK
XD_ERROR: 24 (Software Error)
TBSWERR
BLOCK
XD_ERROR: 25 (Algorithm Error)
TBALGERR
UPDATE
TB Static Data Update Event
TBSTCHNG
UPDATE
FB Static Data Update Event
FBSTCHNG
WRITE
Write Protect Change Alarm
RBWPCHNG
UPDATE
Link Object Update Event
FBLOCHNG
UPDATE
Trend Object Update Event
No Action
ATTENTION
!
When using the 1788-CN2FF, no alarms come from
Fieldbus devices when used with ProcessLogix. Data
with status will be produced.
Table 2.K Fieldbus alarm enumerations and alarm/event type identification
Enumeration
Description
Alarm/Event Type