Rockwell Automation PLC-5 Fieldbus Solutions for Integrated Architecture User Manual - Manual (Page 210)

Publication 1757-UM006A-EN-P - May 2002
A-30 Standard Function Block Parameters
Table A.81 OUT_D
Table A.82 OUT_HI_LIM
Valid Views VIEW_1, VIEW_3
Storage Non-Volatile
Remarks Normally, the operator has permission to write this value, but PROGRAM or
LOCAL remove that permission and grant it to a supervisory computer or a
local control panel.
The Data type consists of the value and status of floating point parameters
that are Inputs or Outputs. It uses the following two elements.
• Status
• Value
Classification Record
Description Represents the primary discrete value calculated as a result of executing the
function.
FF Data Type DS-66
Range OUT_STATE
Usage O/Primary Output
Length 2
Valid Views VIEW_1, VIEW_3
Storage Non-Volatile
Remarks Normally, the operator has permission to write this value, but PROGRAM or
LOCAL remove that permission and grant it to a supervisory computer or a
local control panel.
The data type consists of the value and status of discrete value parameters. It
uses the following two elements.
• Status
• Value
Classification Simple Variable
Description Defines the maximum output value limit in all modes, unless the
CONTROL_OPTS selection No Out limits in Manual is chosen.
FF Data Type Float
Range OUT_SCALE +/- 10 percent
Usage C/Contained
Length 4
Valid Views VIEW_2
Storage Static
Remarks Initial value is 100.