Rockwell Automation PLC-5 Fieldbus Solutions for Integrated Architecture User Manual - Manual (Page 218)

Publication 1757-UM006A-EN-P - May 2002
A-38 Standard Function Block Parameters
Table A.102 ROUT_OUT
Table A.103 RS_STATE
Valid Views VIEW_3
Storage Dynamic
Remarks The data type consists of the value and status of floating point parameters
that are Inputs or Outputs. It uses the following two elements.
• Status
• Value
Classification Record
Description Represents block output and status. It serves as input to a host for back calcu-
lation in ROut mode that allows action to be taken under limited conditions or
mode change
FF Data Type DS-65
Usage C/Remote-Output Out
Length 5
Valid Views VIEW_3
Storage Dynamic
Remarks Read Only
The data type consists of the value and status of floating point parameters
that are Inputs or Outputs. It uses the following two elements.
• Status
• Value
Classification Simple Variable
Description Defines the state of the function block application state machine.
FF Data Type Unsigned 8
Range 1: Start/Restart
2: Initialization
3: On-Line Linking
4: On-Line
5: Standby
6: Failure
Usage C/Resource State
Length 1
Valid Views VIEW_1, VIEW_3
Storage Dynamic
Remarks Read Only