Rockwell Automation PLC-5 Fieldbus Solutions for Integrated Architecture User Manual - Manual (Page 215)

Publication 1757-UM006A-EN-P - May 2002
Standard Function Block Parameters A-35
Table A.94 RCAS_IN_D
Table A.95 RCAS_OUT
Table A.96 RCAS_OUT_D
Classification Record
Description Represents target setpoint and status provided by a supervisory host to the
analog control or output block.
FF Data Type DS-66
Usage C/Remote-Cascade In
Length 2
Valid Views VIEW_3
Storage Non-Volatile
Remarks The data type consists of the value and status of discrete value parameters. It
uses the following two elements.
• Status
• Value
Classification Record
Description Represents block setpoint and status after ramping. It serves as input to a
supervisory host for back calculation that allows action to be taken under lim-
iting conditions or mode change.
FF Data Type DS-65
Usage C/Remote-Cascade Out
Length 5
Valid Views VIEW_3
Storage Dynamic
Remarks Read Only
The data type consists of the value and status of floating point parameters
that are Inputs or Outputs. It uses the following two elements.
• Status
• Value
Classification Record
Description Represents block setpoint and status. It serves as input to a supervisory host
for back calculation that allows action to be taken under limiting conditions or
mode change.
FF Data Type DS-66
Usage C/Remote-Cascade Out
Length 2