Rockwell Automation PLC-5 Fieldbus Solutions for Integrated Architecture User Manual - Manual (Page 257)

Publication 1757-UM006A-EN-P May 2002
1788-CN2FF Installation Example F-9
4. In Network Address, type in the MAC ID of the 1788-CN2FF.
5. Select the number of ports you are using.
For this example we are only using 1.
6. If your computer is on the same ControlNet and the 1788-CN2FF,
set the Path to 02.
If your computer is on another ControlNet, use the path
suggested by RSLinx. A typical PLX path might be 2 6 1 6 2.
2(1 space)6(1 space)1(1 space)6(1 space)2
7. Leave the Timeout as defaulted.
Click Add.You see:
8. Go to Port Configuration on page F-12.
Finding the Interface Driver Name
If you don’t know the name of your device driver do the following:
1. In RSLinx, select Communication Drivers.:
Communication Drivers