Rockwell Automation PLC-5 Fieldbus Solutions for Integrated Architecture User Manual - Manual (Page 292)

Publication 1757-UM006A-EN-P May 2002
F-44 1788-CN2FF Installation Example
Schedule the Connection Between the Controller and the Linking
Device
1. Open RSNetWorx.
2. Select File from the main menu.
3. Select New.
4. Select ControlNet Configuration and click OK.
5. Go online to the ControlNet network.
6. Select the Edits Enabled checkbox in the upper left of the
screen.
7. Browse the network, click the Browse icon.
8. Save the network.
RSNetWorx will schedule all the connections during the save
operation.
View the Controller Tags
1. Open RSLogix 5000 and view the controller tags.
2. Expand the input tags for the linking device so that you can see
the data values. Your screen should appear as shown in
Figure F.6. Your values may be different.