Rockwell Automation PLC-5 Fieldbus Solutions for Integrated Architecture User Manual - Manual (Page 203)

Publication 1757-UM006A-EN-P - May 2002
Standard Function Block Parameters A-23
Table A.63 IN
Table A.64 IN_1
4 SP Track retained target X X
5 Increase to close X
6 Failsafe to value X X
7 Use Failsafe value to restart X X
8 Target to Man if failsafe activated X X
9 Use PV for BKCAL_OUT X X
10 Low Cutoff X
11 Reserved
12 Reserved
13 Reserved
14 Reserved
15 Reserved
Classification Record
Description Represents the primary input value of the block. Blocks that filter the input to
get the PV require this parameter.
FF Data Type DS-65
Usage I/Primary Input
Length 5
Valid Views VIEW_3
Storage Non-Volatile
Remarks Read Only
The Data type consists of the value and status of floating point parameters
that are Inputs or Outputs. It uses the following two elements.
• Status
• Value
Classification Record
Description Represents the auxiliary input value to the block. It is used for values other
than the PV.
FF Data Type DS-65
Usage I/Input
Length 5