Rockwell Automation PLC-5 Fieldbus Solutions for Integrated Architecture User Manual - Manual (Page 108)

Publication 1757-UM006A-EN-P - May 2002
4-22 Configurating the 1757-FIM
16. (Optional) Launch Control Builder to confirm that the device
template is listed in the Rockwell Automation directory in the
Library tab.
Making a fieldbus device template from existing definition (.DEF)
files
Use the following procedure to make a device template from
definition files that have been previously saved to a folder on the
Server's hard drive. The default folder location is:
C:\Honeywell\tps50\system\bin\er\ffdevices
.
1. Click Start ⇒ Programs ⇒ ProcessLogix Engineering Tools
⇒ Fieldbus Library Manager.
The Fieldbus Library Manager (FLM) login window opens.
2. In the Server Name field, select the Server where you want the
device template stored.
The device template is stored in the Engineering Repository
Database (ERDB) on the Server.
3. Enter your login password in the Password field.
You need an access level of at least Engineer to make a
template. See your system administrator to get your assigned
ATTENTION
!
Exit the Control Builder application before launching
the Fieldbus Library Manager utility.