Rockwell Automation PLC-5 Fieldbus Solutions for Integrated Architecture User Manual User Manual
Page 188

Publication 1757-UM006A-EN-P - May 2002
A-8 Standard Function Block Parameters
Table A.20 CLR_FSAFE
Table A.21 CONFIRM_TIME
Table A.22 CONTROL_OPTS
Usage
C/Channel
Length
2
Valid Views
VIEW_4
Storage
Static
Remarks
The initial value is 0.
Classification
Simple Variable
Description
Serves as a switch to reset/clear the device failsafe state after the fault con-
dition is cleared.
FF Data Type
Unsigned 8
Range
1: Off
2: Clear
Usage
C/Contained
Length
1
Storage
Dynamic
Remarks
The operator can control PROGRAM or LOCAL access to these values.
Classification
Simple Variable
Description
Defines the time between retries of alert reports.
FF Data Type
Unsigned 32
Range
Positive
Usage
C/Contained
Length
4
Valid Views
VIEW_2
Storage
Static
Remarks
The initial value is 32000 milliseconds.
Classification
Simple Variable
Description
Represents bit string for control options to alter the calculations done in an
applicable function block.
FF Data Type
Bit String
Usage
C/Contained
Length
2