Lenze PLC Designer ApplicationTemplate (PLC Designer R3-x) - Manual (Page 9)

Lenze · ApplicationTemplate · 1.3 EN - 04/2013
9
About this documentation
Conventions used
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
1.2 Conventions used
This documentation uses the following conventions to distinguish between different types of
information:
Type of information Display Examples/notes
Numbers
Decimal separator
Point The decimal point is generally used.
Example: 1234.56
Text
Version information
Text colour blue All pieces of information that only apply to or from a certain
controller software version are identified accordingly in this
documentation.
Example: This function extension is available as from
software version V3.0!
Program name » « »PLC Designer«...
Window Italics The Message window... / The Options ... dialog box
Variable name By setting bEnable to TRUE...
Control element Bold The OK... button / The Copy... command / The Properties...
tab / The Name ... input field
Sequence of menu
commands
If the execution of a function requires several commands in
a row, the individual commands are separated by an arrow:
Select File  Open to...
Shortcut Use to open the online help.
If a key combination is required for a command, a "+" is
placed between the key identifiers: With +...
Hyperlink underlined Reference to further information: Hyperlink to further
information.
Symbols
Page reference
( 9) Reference to further information: Page number in PDF file.
Step-by-step instructions  Step-by-step instructions are marked by a pictograph.