Lenze PLC Designer ApplicationTemplate (PLC Designer R3-x) - Manual (Page 142)

Appendix
Recipe manager
142
Lenze · ApplicationTemplate · 1.3 EN - 04/2013
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
12.4 Recipe manager
General information on the recipe manager is provided in the »PLC Designer«.
This section contains further information about...
• ...the creation of recipes
• ...the management of recipes via commands: RecipeManCommands
The recipe manager provides for the creation and management of recipes.
• Recipe definitions are variable lists that can be defined by the user.
• Recipes can be read by the controller/archived on the control.
Archiving recipes
All recipes available in the recipe definition are saved in separate files in each case (volatilely on the
controller).
• The recipe files available on the controller can for instance be transferred to the hard disk of the
Engineering PC.

How to proceed:
1. Click the desired axis in the Device view.
2. Click the associated Files tab:
3. Click the button to display the controller data.
• Select the desired recipe file ( *.txtrecipe)
• Transfer the highlighted file to the target location by clicking the arrow key (to
transfer the recipe file to the Engineering PC, you have to navigate to the local hard disk
of the Engineering PC in the area).