Lenze PLC Designer ApplicationTemplate (PLC Designer R3-x) - Manual (Page 17)

Lenze · ApplicationTemplate · 1.3 EN - 04/2013
17
What is the ApplicationTemplate?
Elements of the ApplicationTemplate
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
4.3 Elements of the ApplicationTemplate
4.3.1 Machine Module Tree - MMT
In order to map the desired automation system in the »PLC Designer« on the basis of the
ApplicationTemplate, the structure of the whole machine application must be created in the »PLC
Designer«.
• In a first step, the machine structure must be divided into machine modules.
• The A10_MachineModuleTree machine module tree (MMT) shows the machine modules in
the form of a tree structure from left to right.
[4-1] Machine structure tree (MMT) in the ApplicationTemplateCounter, A10_MachineModuleTree folder
The ApplicationTemplate...
• ...supports two to five hierarchy levels of machine modules.
• ...supports up to 30 machine modules.
[4-2] MMT (Machine Module Tree) with up to five possible hierarchy levels of machine modules