Lenze PLC Designer ApplicationTemplate (PLC Designer R3-x) - Manual (Page 55)

Lenze · ApplicationTemplate · 1.3 EN - 04/2013
55
Working with the ApplicationTemplate
Assigning the module application (MAP) to the task
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Manual assignment

How to proceed:
1. Double-click the A11_ModuleAppCalls folder.
2. Add the module application call in the program part of the corresponding task (example:
MAC_Task_high).
Note: The programming language of MAC_Task_xxx (PRG) is FBD (function block diagram).
• Use the Input assistance to assign the structure MM_Par.sc (element:
Application).
Note: Activate the Insert with namespace prefix option in the ;Input assistant .
Results: The machine module...
• ...is now integrated into the machine module tree (MMT).
• ...can be controlled by the internal state machine.