Lenze PLC Designer ApplicationTemplate (PLC Designer R3-x) - Manual (Page 104)

Visualising in the ApplicationTemplate
Extending the visualization
104
Lenze · ApplicationTemplate · 1.3 EN - 04/2013
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
10 Visualising in the ApplicationTemplate
The ApplicationTemplate contains the predefined L_Main
visualization in the A20_Visualisation folder
In order to create further visualization from the visualization elements of the ApplicationTemplate,
the steps described in the following section have to be executed.
10.1 Extending the visualization
This section provides information about how to extend the L_Main visualization included in the
ApplicationTemplateCounter sample project by further visualization pages.
The procedure in the ApplicationTemplate is identical. The lower-level machine modules must be
newly created.
• The precondition for extending the
visualization in this example
(ApplicationTemplateCounter) is that first
another machine module has to be
integrated into the MachineModuleTree
(
MMT). Integrating a machine
module into the MMT ( 53)
• The other module application has to be
integrated in the program part in the
A11_ModulAppCalls folder.
• Call MAC_Task_High . (example:
MM_Dcl.Modul3.App1)