Lenze PLC Designer ApplicationTemplate (PLC Designer R3-x) - Manual (Page 131)

Lenze · ApplicationTemplate · 1.3 EN - 04/2013
131
Appendix
Method overview - ApplicationTemplate
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
12 Appendix
12.1 Method overview - ApplicationTemplate
12.1.1 Accessing the state machine - the methods of the BaseChannel
Identifier/function Transfer value/data type Description
Reading values
baseChannelGetActualState
Determines the actual state of the
state machine for the lower-level
slave module / for its own machine
module.
MM_Address
L_EATP_MM_Address
• Address of the module the current
state of which is to be requested.
• The value "0" and the
L_EATP_CONST.OWNID constant
address the module's intrinsic ID.
Return value/data type
L_EATP_SMStates • Current status of the machine
module requested
baseChannelGetErrorInformation
Reads out error information with the
highest priority. Error sources may
be:
• Module's intrinsic application
(MAP).
• Lower-level slave machine
module.
Input • Address of the module the current
state of which is to be requested.
• The value "0" and the
L_EATP_CONST.OWNID constant
address the module's intrinsic ID.
MM_Address
L_EATP_MM_Address
Return values / data type
dwActPriority
DWORD
Current error information:
• Priority,
• Error number,
• Error response type,
• Acknowledgement response,
• Error texts,
• Error details.
wActErrCode
WORD
eActReaction
L_EATP_ErrorReactionType
xAckNeeded
BOOL
sActText
STRING
dwActErrDetail
DWORD
baseChannelGetNominalState
• Determines the target status of
the state machine for the
machine module/the user's own
module requested.
MM_Address
L_EATP_MM_Address
• Relative address of the module
the current state of which is to be
requested.
• The value "0" and the
L_EATP_CONST.OWNID constant
address the module's intrinsic
address.
Return value/data type
L_EATP_SMStates • Desired status of the machine
module requested