Lenze PLC Designer ApplicationTemplate (PLC Designer R3-x) - Manual (Page 31)

Lenze · ApplicationTemplate · 1.3 EN - 04/2013
31
Opening the ApplicationTemplate
Create a new project - open the ApplicationTemplate
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
7.1 Create a new project - open the ApplicationTemplate
The ApplicationTemplate is included as a project template (*.project, ) im »PLC Designer« from
V3.3 onwards. In order to call the ApplicationTemplate, a new project has to be created, taking the
ApplicationTemplate as template.

How to proceed:
1. Create new project:
• File New project
• Select category Lenze Application Template
• Open template L_ApplicationTemplate
Which template do you want to use? Function
ApplicationTemplate
Use Lenze application template L_ApplicationTemplate.
It includes a structure predefined by Lenze which serves to ...
• ... standardise applications by means of a defined folder structure.
• ... structure applications with machine modules.
ApplicationTemplateCounter Sample project with the Lenze application template L_ApplicationTemplate.
• It includes two lower-level machine modules which are integrated into
the MachineModuleTree (MMT).
• Contains one counter example (Automatic Modus).
The sample project is located in the Lenze Application Samples\Lenze
Standard category