Lenze PLC Designer ApplicationTemplate (PLC Designer R3-x) - Manual (Page 37)

Lenze · ApplicationTemplate · 1.3 EN - 04/2013
37
Opening the ApplicationTemplate
Visualisation of the machine modules
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
7.7 Visualisation of the machine modules
• Area visualises communication between the
individual machine modules by the AppChannelData
structure.
• The AppChannelData structure provides the
infrastructure for communication of the application
data. The AppChannelData structure(ACD) ( 73)
• ApplicationTemplateCounter:
In this area, the demo visualization of the sample
programs is shown. The sample program in the
ApplicationTemplateCounter ( 134)
• The Lock data button inhibits a data area of the ACD
structure/enables the data area again.
Methods for inhibit/enable
• Lock(): Inhibit data area of the ACD structure.
L_EATP_CriticalSection ( 117)
• Unlock(): Enable inhibited data area of the ACD
structure.
L_EATP_ErrorListHandler ( 118)
•
Consistent data transfer ( 99)
• The buttons in area  activate the desired status
(state)/enable the acknowledgement of errors.
• The Error Quit button acknowledges the error
message. Error handling ( 92)
• If e.g. MM_Modul 1 is selected, errors can
be triggered via fields xError[01...04] of
L_EATP_ErrorSet .
L_EATP_ErrorSet ( 119)