Lenze PLC Designer ApplicationTemplate (PLC Designer R3-x) - Manual (Page 72)

Architecture: The ApplicationTemplate in detail
Accessing structure variables of machine modules
72
Lenze · ApplicationTemplate · 1.3 EN - 04/2013
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
The associated program call in the machine application has the following syntax:
[9-3] Sample program which assigns the value 4711 to the diPieces visualization variable.
9.1.2 Accessing structures of other machine modules
The global machine module structures are instanced in the A55_VarLists folder.
• Like this, the structures and machine modules of the ApplicationTemplate can be reused.
• The structure variables of an optional machine module can be used from another machine
module.
• In order to be able to use the variables of a global structure of machine module 1 (example:
MM_Module1) in another machine application of machine module 2 (example: MM_Module2),
the following program call is required:
[9-4] Sample program: Accessing the MM_Vis structure of module 1.
Vis.diPieces := 4711;
diPiecesModul1 := MM_Vis.scModule1;