Lenze PLC Designer ApplicationTemplate (PLC Designer R3-x) - Manual (Page 8)

About this documentation
Document history
8
Lenze · ApplicationTemplate · 1.3 EN - 04/2013
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Information regarding the validity
The information in this documentation applies to the following Lenze software:
Valid for the following Lenze templates:
• "ApplicationTemplate Counter" sample project: L_ApplicationTemplateCounter
• "Application Template" application template: L_ApplicationTemplate
1.1 Document history
Software From software version
»PLC Designer« 3.5
Version Description
1.0 04/2012 TD11 First edition
1.1 07/2012 TD11 Updated to M5 of the ApplicationTemplate
• General correction
• Adaptation to VISU layout according to the Lenze programming style guide for
FBs.
1.2 11/2012 TD11 Updated to »PLC Designer« V3.3.2
• New: ApplicationTemplateCounter sample project (Lenze standard)
1.3 04/2013 TD11 Updated to »PLC Designer« V3.5
• Software update of ApplicationTemplateCounter/ApplicationTemplate.
• New: Application example "flying saw".